圆锥破碎机

Our company sells the CH420, CH430, CH440, CH660, CH870, CH880, CS420, CS430, CS440, CS660 series cone crusher.

These cone crushers have high performance and low total cost.

Also we can supply many high quality and cheap wear parts to keep these crushers running on good health.

机器部件清单：

1. 进料斗。

液压调节式旋回圆锥破碎机，配备破碎腔、双臂设计的上壳体（含可更换护臂罩及臂架帽）。

3. 刚性三臂设计底壳，配备可更换臂护罩和检修舱口。

电机驱动的液压控制系统，包括按钮式液压调节控制和用于防止不可破碎物损坏的蓄能器。

破碎机自动润滑系统，带独立油箱单元，包括两个浸入式油加热器。油箱与破碎机之间的管道不包括在内。

6. 底部外壳侧衬板由耐磨钢板制成。

7. 用于吸收振动的橡胶压缩安装件。

8. V带传动，包括破碎机侧皮带轮、电机侧皮带轮和V带。

9. 超压防尘密封装置包含带空气过滤器的鼓风机、5米连接软管（用于连接破碎机）及配套接头。

空调油换热器适用于环境温度低于55°C。

11. 专用工具、工具箱及手册。

请查看产能表。

Our company exports S series cone crusher for a long time. They have good output with maintainability, economical efficiency. These crushers' wear spares are very low. You don't need to spend much money to keep them running well.

1. S 2 FT 圆锥破碎机。

2. S 3 FT 圆锥破碎机。

S 4 FT圆锥破碎机。

4. 4.25英尺圆锥破碎机。

5. S 5.5 FT圆锥破碎机。

6. S 7 FT圆锥破碎机。

此外，我们还为这些机器提供备件。我们受益于中国强大的生产能力。我们的备件和机器在世界上具有很强的竞争力。

With the rapid development of mining technology, the cone crusher can be divided into four types: compound cone crusher, spring cone crusher,hydraulic cone crusher and gyratory crusher. According to different models, the cone crusher is divided into VSC series cone crusher(compound cone crusher), Symons cone crusher, PY cone crusher, single cylinder hydraulic cone crusher, multi-cylinder hydraulic cone crusher， gyratory crusher， etc.

A cone crusher is similar in operation to a gyratory crusher, with less steepness in the crushing chamber and more of a parallel zone between crushing zones. A cone crusher breaks rock by squeezing the rock between an eccentrically gyrating spindle, which is covered by a wear resistant mantle, and the enclosing concave hopper, covered by a manganese concave or a bowl liner. As rock enters the top of the cone crusher, it becomes wedged and squeezed between the mantle and the bowl liner or concave. Large pieces of ore are broken once, and then fall to a lower position (because they are now smaller) where they are broken again. This process continues until the pieces are small enough to fall through the narrow opening at the bottom of the crusher.

A cone crusher is suitable for crushing a variety of mid-hard and above mid-hard ores and rocks. It has the advantage of reliable construction, high productivity, easy adjustment and lower operational costs. The spring release system of a cone crusher acts an overload protection that allows tramp to pass through the crushing chamber without damage to the crusher.

Jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. It is widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Jaw crusher can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc.

1. 结构简单，维护方便；

性能稳定；

3. 甚至最终颗粒和高破碎比。