Trituradoras de cono

Our company sells the CH420, CH430, CH440, CH660, CH870, CH880, CS420, CS430, CS440, CS660 series cone crusher.

These cone crushers have high performance and low total cost.

Also we can supply many high quality and cheap wear parts to keep these crushers running on good health.

Lista de componentes de la máquina:

1. Tolva de alimentación.

Trituradora de Cono Giratorio ajustable hidráulicamente con cámara de trituración, diseño de dos brazos en la carcasa superior con escudos de brazo reemplazables y tapa de araña.

3. Diseño de carcasa inferior con tres brazos rígidos, escudos de brazos reemplazables y escotillas de inspección.

4. Sistema de control hidráulico accionado por motor que incluye control de ajuste hidráulico por pulsador y un acumulador para protección contra objetos no triturables.

Sistema de lubricación automática para la trituradora con unidad de tanque de aceite separado, incluyendo dos calentadores de aceite por inmersión. Tuberías entre el tanque de aceite y la trituradora excluidas.

6. Revestimientos laterales inferiores de la carcasa fabricados en placa de acero resistente al desgaste.

7. Montajes de compresión de goma para la absorción de vibraciones.

8. Transmisión por correa en V, incluyendo polea del lado de la trituradora, polea del lado del motor y correas en V.

9. Sello de polvo de sobrepresión que consta de soplador con filtro de aire, manguera de 5 m para conexión a la trituradora y accesorios de conexión.

Intercambiador de calor de aceite para aire acondicionado adecuado para temperaturas ambientales inferiores a 55°C.

11. Herramientas especiales, caja de herramientas y manuales.

Por favor, consulte las tablas de capacidad.

Our company exports S series cone crusher for a long time. They have good output with maintainability, economical efficiency. These crushers' wear spares are very low. You don't need to spend much money to keep them running well.

1. S 2 FT trituradoras de cono.

2. S 3 FT trituradoras de cono.

3. S 4 FT trituradoras de cono.

4. Trituradoras de cono S 4.25 FT.

5. Trituradoras de cono S 5.5 FT.

6. Trituradoras de cono S 7 FT.

También suministramos repuestos para estas máquinas. Nos beneficiamos de la potente capacidad de producción en China. Nuestros repuestos y máquinas tienen una fuerte competitividad en el mundo.

With the rapid development of mining technology, the cone crusher can be divided into four types: compound cone crusher, spring cone crusher,hydraulic cone crusher and gyratory crusher. According to different models, the cone crusher is divided into VSC series cone crusher(compound cone crusher), Symons cone crusher, PY cone crusher, single cylinder hydraulic cone crusher, multi-cylinder hydraulic cone crusher， gyratory crusher， etc.

A cone crusher is similar in operation to a gyratory crusher, with less steepness in the crushing chamber and more of a parallel zone between crushing zones. A cone crusher breaks rock by squeezing the rock between an eccentrically gyrating spindle, which is covered by a wear resistant mantle, and the enclosing concave hopper, covered by a manganese concave or a bowl liner. As rock enters the top of the cone crusher, it becomes wedged and squeezed between the mantle and the bowl liner or concave. Large pieces of ore are broken once, and then fall to a lower position (because they are now smaller) where they are broken again. This process continues until the pieces are small enough to fall through the narrow opening at the bottom of the crusher.

A cone crusher is suitable for crushing a variety of mid-hard and above mid-hard ores and rocks. It has the advantage of reliable construction, high productivity, easy adjustment and lower operational costs. The spring release system of a cone crusher acts an overload protection that allows tramp to pass through the crushing chamber without damage to the crusher.

Jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. It is widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Jaw crusher can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc.

1. estructura simple, fácil mantenimiento;

2. rendimiento estable;

3. incluso partículas finales y alta relación de trituración.